Power up from 7.5 watts to 15 watts of power with the fl ip of a switch. The economical 7.5- watt output mode burns for up to 10 hours and provides plenty of light for most diving conditions. For those pitch black nights, wreck diving and dark crevices, simply fl ip the switch to the screaming bright 15- watt output mode. Princeton Tec’s innovative dual fi lament multi output bulb system eliminates the need for two bulbs and complex switching systems. This unique system also offers the added security of switching to an alternate bulb fi lament in the event the fi lament in use burns out
POWER205 Lumens
LAMPXENON BULB
BURN TIME10 Hours
BATTERIES8 C Alkaline Included
WEIGHT1021g
UL RATING:APPROVED
Class I, Division 2, Groups A, B, C & G
UL TEMP CODE:T4
COLOuRS
BLACKBLUENEON YELLOWXENON BULBSXENON BULBS come closest to replicating the color temperature of daytime light. They also generate about twice the brightness and consume about half the power of traditional halogen bulbs.Halogen and Xenon Lights are well-suited to applications where a long-throwing beam is required such as caving and search and rescue. They are less desirable for longer-term, backcountry uses, where weight and battery efficiency are a must.WEIGHT - 1021Princeton Tecs advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products. WATERPROOF - LEVEL 3The highest of Princeton Tecs ratings, Level 3 is assigned to lights that offer a degree of water protection equivalent to IPX8 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 3 provide waterproof integrity for continual submersion in water at depths down to 100 meters.UL CERTIFICATIONUnderwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I Division II Groups A, B, C, & D or Class II - Division II Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I Division II Groups A,B,C,& D will be noted with one (+) Class II Division II approved for Groups F, & G, will be noted with two (++).MULTIPLE MODESMultiple settings on many of our products give you the flexibility to adjust your lights brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.LUMEN 205The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
BLACK
BLUE
NEON YELLOW
XENON BULBSXENON BULBS come closest to replicating the color temperature of daytime light. They also generate about twice the brightness and consume about half the power of traditional halogen bulbs.Halogen and Xenon Lights are well-suited to applications where a long-throwing beam is required such as caving and search and rescue. They are less desirable for longer-term, backcountry uses, where weight and battery efficiency are a must.
XENON BULBS come closest to replicating the color temperature of daytime light. They also generate about twice the brightness and consume about half the power of traditional halogen bulbs.
WEIGHT - 1021Princeton Tecs advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products. WATERPROOF - LEVEL 3The highest of Princeton Tecs ratings, Level 3 is assigned to lights that offer a degree of water protection equivalent to IPX8 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 3 provide waterproof integrity for continual submersion in water at depths down to 100 meters.UL CERTIFICATIONUnderwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I Division II Groups A, B, C, & D or Class II - Division II Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I Division II Groups A,B,C,& D will be noted with one (+) Class II Division II approved for Groups F, & G, will be noted with two (++).MULTIPLE MODESMultiple settings on many of our products give you the flexibility to adjust your lights brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.LUMEN 205The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
Princeton Tecs advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products.
WATERPROOF - LEVEL 3The highest of Princeton Tecs ratings, Level 3 is assigned to lights that offer a degree of water protection equivalent to IPX8 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 3 provide waterproof integrity for continual submersion in water at depths down to 100 meters.UL CERTIFICATIONUnderwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I Division II Groups A, B, C, & D or Class II - Division II Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I Division II Groups A,B,C,& D will be noted with one (+) Class II Division II approved for Groups F, & G, will be noted with two (++).MULTIPLE MODESMultiple settings on many of our products give you the flexibility to adjust your lights brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.LUMEN 205The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
The highest of Princeton Tecs ratings, Level 3 is assigned to lights that offer a degree of water protection equivalent to IPX8 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 3 provide waterproof integrity for continual submersion in water at depths down to 100 meters.
UL CERTIFICATIONUnderwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I Division II Groups A, B, C, & D or Class II - Division II Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I Division II Groups A,B,C,& D will be noted with one (+) Class II Division II approved for Groups F, & G, will be noted with two (++).MULTIPLE MODESMultiple settings on many of our products give you the flexibility to adjust your lights brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.LUMEN 205The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
Underwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I Division II Groups A, B, C, & D or Class II - Division II Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I Division II Groups A,B,C,& D will be noted with one (+) Class II Division II approved for Groups F, & G, will be noted with two (++).
MULTIPLE MODESMultiple settings on many of our products give you the flexibility to adjust your lights brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.LUMEN 205The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
Multiple settings on many of our products give you the flexibility to adjust your lights brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.
LUMEN 205The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.
FOCUSED WIDE BEAMSThis beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.8 C cell batteries
This beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.
8 C cell batteries
Product 3/4
